promo 2023

Buy 20 or more µFR Series or DL533R Series items and get 23% special 2023 promo discount!

Get any DL533N Series, RGB LED Display module, or Development Kit product with a +15% special discount!

At least one Development Kit multi-reader category item brings you a 5% extra discount on your chart total!

NFC RFID Reader Writer - μFR Classic - 13.56MHz RFID Contactless Card Encoder + FREE SDK with software examples

NFC RFID Reader Writer - μFR Classic with RF Booster + FREE SDK

NFC RFID Reader Writer - µFR Advance with RF Booster and SAM card - Programmer with Real-Time Clock and EEPROM + FREE SDK

NFC RFID Reader Writer - µFR Advance with RF Booster and SAM card - Programmer with Real-Time Clock and EEPROM + FREE SDK

NFC RFID Reader Writer - uFR Advance with RF Booster- Programmer with Real-Time Clock and EEPROM + FREE SDK

uFR Advance is a second model in Digital Logic’s uFR Series of NFC RFID readers writers, which represents an improved version of uFR Classic.
It is an NFC Forum & RFID compatible contactless reader/writer which successfully implements ISO14443 A & B and ISO18092 standards on an HF working frequency of 13.56 MHz.
This device is a genuine Digital Logic product, 100% designed, produced, and programmed at company premises located in Serbia, Europe.
All models of the uFR Series are using the same SDK API and are totally compatible and interoperable in a common set of functions.

€82.00
Availability: In stock
SKU
NFC_RFID_R_W_FR_ADVANCE_WITH_RF_BOOSTER
NFC RFID Reader Writer - uFR Advance with RF Booster- Programmer with Real-Time Clock and EEPROM + FREE SDK is available to buy in increments of 1

NFC Reader Writer - uFR Advance

uFR Advance is a second model in Digital Logic’s uFR Series of NFC RFID readers writers, which represents an improved version of uFR Classic.
It is an NFC Forum & RFID compatible contactless reader/writer which successfully implements ISO14443 A & B and ISO18092 standards on an HF working frequency of 13.56 MHz.
This device is a genuine Digital Logic product, 100% designed, produced, and programmed at company premises located in Serbia, Europe.
All models of the uFR Series are using the same SDK API and are totally compatible and interoperable in a common set of functions.

The device comes with a fully featured SDK package, which includes firmware, libraries, software examples, and documentation for various platforms, operating systems, and developing environments. Regular SDK upgrades (including firmware, libraries, and API) are launched often and can be obtained from the company’s website for FREE. 

All mentioned facts combined with free extensive and fast responsive support give this product an outstanding position in this industry sector.

Hardware

Reader’s RF communication is based on NXP’s powerful, highly integrated reader IC for contactless communication at 13.56 MHz, which supports all protocol layers of the ISO/IEC 14443 A, ISO/IEC 14443 B, and ISO/IEC 18092 communication standards.
All variants of the MIFARE® cards family (MIFARE Mini®, MIFARE Classic® 1K, MIFARE Classic® 4K, MIFARE Ultralight®, MIFARE Ultralight C® MIFARE DESFire® EV1, and MIFARE Plus® ) RF identification protocols are supported. Additionally, NFC Forum specification for “Type 2 Tag” is supported, which adds the NTAG2xx chip family to the above list.
It has a built-in anti-collision mechanism for detecting multiple cards at a time. Built-in well-tuned antenna provides proximity operating distance up to 80 mm (depending on the card’s antenna geometry) and contactless communication speed at higher baud rates (up to 424 kBd).
The device also has a built-in Crypto1® algorithm and secure non-volatile internal key memory storage for better security. Communication with the host is provided by using a USB 2.0 Full Speed compatible interface. Data transfer rates are limited from 9600 baud to 1 Mbaud, for integrity and security reasons.
The reader can also act as a serial interface device using FTDI’s Virtual COM port (VCP) drivers.
Audible (speaker) and 2 LEDs visible indicators are built in and absolutely user controllable.

Active amplified antenna with RF booster – providing better and more homogenous card reading range. (Optional)

SAM (Secure Access Module) slot for PCM1.1 SAM cards – ideal for storing keys in the most secure manner and for performing secure cryptography operations. (Optional)

The main differences compared to uFR Classic are:

    • addition of RTC (Real Time Clock), which provides always accurate time to prevent fake logs and timestamps
    • user configurable, password-protected part of EEPROM, which is convenient for storing sensitive data, like license keys or similar.

Firmware

Since hardware is based on the MCU platform, it runs on company-developed custom firmware. Communication between host and reader is provided through high-speed direct access FTDI chip features.
At the core, the communication level device uses a company-developed, proprietary communication protocol, which is well documented in SDK API reference.

Software Development Kit (SDK)

Reader comes with fully featured SDK which consist of external libraries, software examples with source codes, documentation about API reference and communication protocol and some useful software tools.
Libraries are cross-compiled for various platforms and regularly supported are Windows x86/x64 and UWP, Linux x86/x64, Mac OSX x64, ARM/ARM HF and Arduino. Other platforms can be supported as custom release, on customers demand, depending on existence of project or partnership relation.
Software examples are divided in three stages according to complexity, with some new additions of NFC examples.

Find more details at our official website page  RFID NFC Reader Writer – µFR Advance

 

More Information
Hardware upgrades RTC, EEPROM, RF Booster
Technical Specification

Specification brief

Operating frequency

13.56 MHz

Reading range

Depending on antenna geometry and reader configuration, operating distance is 2-8cm (0,78"-3,15")

Read/Write speed

Up to 424 kbps

Supply current

150mA (operating)

Supply voltage

5V

Supported cards and tags

Type A (Hardware + Software), Type B (Hardware)

Supported cards: MIFARE Mini® , MIFARE Classic® 1K / 4K, MIFARE Ultralight®, MIFARE Ultralight® C, NTAG2xx, MIFARE DESFire® EV1, MIFARE Plus®

NFC support

Yes *

Anti-collision

YES, Hardware

Encryption

AES128 (hardware, by reader's firmware), DES/3DES (software, by library)

Connection and power supply

USB 2.0 port, power supplied through USB port

Software

with Java, Java Applet, JavaScript, Lazarus, Delphi, C + + Builder, Microsoft® Visual C++ .NET, Microsoft® Visual C #, Microsoft® Visual Basic .NET

Supported Operating Systems

Microsoft® Windows™, Linux®, OS X, Android **

Standards

ISO/IEC 14443A & B, ISO/IEC 18092

Related equipment

USB cable, Free software download

Additional features

Real Time Clock (RTC), EEPROM, RF Booster

Weight

0.11kg nett

Dimensions

16cm x 12.6cm x 3.2cm (6,3" x 5" x 1,2")

Operation temperature

-10 +50 ° C

Accessories

Cards, keyfobs or tags

Certificates

CE, RoHS

Warranty

24 months

 
Software Support Software Development Kit (SDK), Executable Software Tools, Hardware-Integrated Software, Open-source Software Support, Updateable Firmware, Dedicated Libraries
Development kit Yes
Manufacturer Digital Logic Ltd
Brand uFR D-Logic
Device housing type Device default housing
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
RTC, EEPROM, RF Booster
Software Development Kit (SDK), Executable Software Tools, Hardware-Integrated Software, Open-source Software Support, Updateable Firmware, Dedicated Libraries