Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
DL533N USB Stick OEM Module: LibNFC-supported NFC RFID Reader Writer (PN533)
The DL533N USB Dongle stick is an NFC RFID smart card reader/writer that supports projects based on the libNFC library. This device enables both the reading and writing of NFC RFID cards/tags.
Furthermore, it also supports NFC P2P communication.
The DL533N USB Dongle stick is developed based on the NXP PN533 chip. Therefore, it follows the recommendations and guidelines of the manufacturer of this chip. Since the NXP PN533 supports a whole range of NFC forum specifications and standards, the DL533N reader also inherits these same features.
| Size H x W x D (mm & inches) | 70 x 15 x 5 mm 2.76 x 0.59 x 0.2 inches |
€36.00
Availability:
In stock
SKU
NFC_RFID_R_W_DL533N_XL_OEM_DEV
- Buy 5 for €34.84 each and save 3.21%
- Buy 10 for €33.59 each and save 6.7%
- Buy 25 for €32.14 each and save 10.71%
- Buy 50 for €30.73 each and save 14.64%
- Buy 100 for €29.38 each and save 18.39%
DL533N USB Stick OEM Module: LibNFC-supported NFC RFID Reader Writer (PN533) is available to buy in increments of 1
NFC USB Stick OEM - DL533N - NFC Reader Writer
The NFC USB Stick enables the reading and writing of NFC cards and tags as well as NFC P2P communication.
The device is produced by Digital Logic LTD. It is built upon the NXP PN533 chip according to manufacturers' recommendations and guidelines. DL533N USB Stick supports the full range of the NFC Forum specifications and standards.
This product is fully supported by the open-source library LibNFC, which makes it a good starting point for the development of NFC applications on various platforms.
Using LibNFC libraries and examples is well explained on the LibNFC community and forums.
LibNFC is an open-source project, has a big community, and is developed continuously.
Using compiled driver you can further explore LibNFC C API and continue developing your own software.
On the Windows platform, you can use the official NXP Drivers for the PN533-based products.
The device is produced by Digital Logic LTD. It is built upon the NXP PN533 chip according to manufacturers' recommendations and guidelines. DL533N USB Stick supports the full range of the NFC Forum specifications and standards.
This product is fully supported by the open-source library LibNFC, which makes it a good starting point for the development of NFC applications on various platforms.
Using LibNFC libraries and examples is well explained on the LibNFC community and forums.
LibNFC is an open-source project, has a big community, and is developed continuously.
Typical usage
- Read NFC-Tags: Read the contents of NFC tags like most MIFARE® cards, FeliCa, and Topaz.
- Write NFC-Tags: Write contents to NFC-Tags (URLs, SMS, Phone No, vCards, MIME types…).
- Card emulation: Emulate Type 2 and Type 4 NFC tags, which can be read by other NFC devices.P2P communication: Use the device for active NFC-based P2P communication to transfer data between NFC-capable devices.
Software
The device is delivered without any binary driver. Using LibUSB and LibNFC you can compile drivers for Windows, Mac OS X, and Linux.Using compiled driver you can further explore LibNFC C API and continue developing your own software.
On the Windows platform, you can use the official NXP Drivers for the PN533-based products.
Highlights
- Supports ISO/IEC 14443A/MIFARE®.
- Supports ISO/IEC 14443B.
- Supports MIFARE Classic® 1 KB or MIFARE Classic® 4 KB emulation encryption in Reader/Writer mode and MIFARE® higher transfer speed communication at 212 kbit/s and 424 kbit/s.
- Supports contactless communication according to the FeliCa protocol at 212 kbit/s and 424 kbit/s.
- Supports NFC P2P communication.
- Large community (LibNFC) support.
- Reader dimensions (95 x 63 x 11 mm), convenient for everyday
| Special Price | €31.00 | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Operating Frequency | 13.56 MHz | ||||||||||||||||||||||||||||||
| Software Support | Open-source Software Support | ||||||||||||||||||||||||||||||
| Technical Specification |
|
||||||||||||||||||||||||||||||
| HS Code | 84718000 | ||||||||||||||||||||||||||||||
| Package Height (cm) | 5.000000 | ||||||||||||||||||||||||||||||
| Package Width (cm) | 10.000000 | ||||||||||||||||||||||||||||||
| Package Length (cm) | 11.000000 | ||||||||||||||||||||||||||||||
| Manufacturer | Digital Logic Ltd | ||||||||||||||||||||||||||||||
| Brand | DL533N D-Logic | ||||||||||||||||||||||||||||||
| Development kit | No | ||||||||||||||||||||||||||||||
| Device housing type | OEM - no housing |
Write Your Own Review
| Feature | Description |
|---|---|
| Operating frequency | 13.56 MHz |
| Read range | Operating distance is 0-60mm (0”-2.36”), depending on the antenna geometry and reader configuration |
| Read/Write speed | 212 kbit/s, 424 kbit/s |
| Supply current | 150mA (operating) |
| Supply voltage | 5V |
| Supported cards and tags |
MIFARE® family: MIFARE Mini®, MIFARE Classic® (1K, 4K, EV1), MIFARE Ultralight®, MIFARE Ultralight C®, MIFARE PLUS® (2K, 4K), MIFARE DESFire® (Light, 2K, 4K, 8K, EV1, EV2) NTAG® family: NXP NTAG® 2xx Type 2 (210, 213, 215, 216 Tag Tamper), NXP NTAG® 4xx DNA Type 4 (413, 424) FeliCa, Smart eID, ICAO, EMVCo 2.1, picoPass, Jewel/Topaz, etc. |
| Connection and power supply | USB port, RS232, UART (TTL) |
| Communication | NFC P2P communication |
| Software |
Example source code script for DL533N NFC Reader basic testing with implemented GPIO pins for LED control and buzzer-specific |
| Supported Operating Systems | Microsoft® Windows™, Linux®, macOS, Android |
| Smart Card Interface | ISO14443 Type A & B |
| Related Equipment | USB cable, Free software download |
| Certification | CE, RoHS |
| Accessories | Cards, key-fobs, labels, wristbands, tags |
libNFC-based source-code